#HUAWEI USB DONGLE SPEED SLOW INSTALL#
#HUAWEI USB DONGLE SPEED SLOW PASSWORD#
#HUAWEI USB DONGLE SPEED SLOW DOWNLOAD#

The firewall, SIP, and UPnP features of the dongle can be disabled. Form now on, all incoming connections are passed directly to OpenWRT. In the configuration interface of the dongle ( 192.168.8.1), locate the DMZ settings (Settings > Security > DMZ settings) and enable the DMZ feature with a target IP address of 192.168.8.100, which should be the IP of the eth1 network interface on the router that the dongle is connected to (double check in OpenWRT under Network > Interfaces > eth1 > IPv4). This is a pretty bad workaround and there’s a much better solution for dongles with the DMZ feature available (which depends on the firmware version). Because the NAT cannot be deactivated on the dongle, the ugly and configuration intense solution is often to disable the OpenWRT NAT and use the dongle’s instead. When running server applications on the router or network, additional configuration is necessary to make them accessible from the internet.īoth the OpenWRT device and the Hi-Link dongle work in router mode and separate the internal from the external network through a NAT, and this double NAT is a pretty effective way to block incoming connections. Don’t forget to disable or remove this network once finished (Network > Wifi > Disable/Remove). The router can be temporarily connected to another wifi network (Network > Wifi > Scan > Join Network), e.g. Installing the packages obviously requires an already existing internet connection. That’s it, the router is online! The web interface remains accessible through the browser at its usual IP address ( 192.168.8.1).

#HUAWEI USB DONGLE SPEED SLOW INSTALL#

They can either be installed through the web interface (System > Software) or by running the following on the command line: opkg update & opkg install kmod-usb-net-cdc-ether usb-modeswitchĪ new network interface will show up ( eth1 in my case), that just needs to be added to the wan firewall group (Network > Interfaces > eth1 > Edit > Firewall Settings > Assign firewall-zone). The same goes for the access to the dongle setup screen ( The dongle isnt recognized as a mobile internet device, rather it appears as an Ethernet connection (eth2).

It enables me to connect to the internet, but the connection is very slow. In the pane on the right, set the parameters related to the FTP downloading to share the FTP file of the ONT. I have an USB-dongle from Huawei, which Im using on Linux. In the navigation tree on the left, choose Network Applications > USB Application.

#HUAWEI USB DONGLE SPEED SLOW PASSWORD#

Note: If ambient temperature is high, the network signal should be strong and good ventilation is required.Getting the Huawei E3372 LTE dongle to work on a router with OpenWRT 15.05 Chaos Calmer is very easy and requires two additional packages: kmod-usb-net-cdc-ether and usb-modeswitch. Enter the default login account and password on the nameplate on the rear of the ONT and click Login. * Supported OS: Linux (kernel version equal to or above 2.6.21) Notes: MS2372h does not support SMS text messaging and remote management capabilities at the same time. * Remotely manage the device via SMS (need customization) * Antenna: Built-in antenna, supporting diversity for 3G/4G WCDMA/HSPA/HSPA+: Compliant with 3GPP TS 25.101(R8) LTE: Compliant with 3GPP TS 36.101 (R9) HSPA+/HSUPA/HSDPA/WCDMA +24dBm (Power Class 3) HSPA+ data service of up to 21.6 Mbit/s Here now, there are three variant models for Huawei MS2372 with supported frequency bands as below: In addition to the built-in diversity antenna, the Huawei MS2372 also has the possibility to be connected to one or two external antennas via its two CRC9 connectors.

#HUAWEI USB DONGLE SPEED SLOW DOWNLOAD#

The Huawei MS2372 could support peak download speed up to 150Mbps and upload speed to 50Mbps. It supports multiple LTE bands and is designed for use in the EMEA region and other versions of the MS2372h for other regions will follow later this year. Huawei MS2372 is a robust, industrial LTE CAT-4 USB IoT dongle that can easily be controlled using standard AT commands.

Huawei usb dongle speed slow